To activate your DJI MG-1 Agras, please follow these steps, 1-First Step: download and install all these two software,
And this driver,
2-Second Step: Connect the drone to your computer, and open “AGRAS MG-1 Assistant Software v1.8 (For drone)” that you installed from step one, and click on “Tools” as shown on screenshot bellow, and make sure the “hardware IDfirmware” is displayed at this step before you go to step 3.
3-Last Step: Click on “Register” beside “Tools” on your right, as shown on screenshot bellow, and then on registration page check the “Current Code”
a- If the current code is “N/A”, please send us your drone's SN, then we will give you the first time activation code to save it in activation code field and activate the drone.
b- If the “Current Code” shows 32 char and digits, that means we have already activated your drone in our store, and you don’t need to take any action. Drone should be ready to start spraying.
Note: The drivers seem don't work well with Win 7 sometimes, so that it is suggested to use Win 10.
The following link on DJI website also have all files related to MG-1 drone,
Also there are documents, and manuals available on that link if you want. Please let us know, if you have any question, or need more assistance.
Technical supporting team